Please Sign In


New To Sportsman Network?

Bent Poles and Plenty Laughs 1-17-16

Reply
Site Sponsor
 
Bubba Meyers and crew fished with me today. The front that passed through overnight with 40+ mph winds didn't help much. The winds were howling at 25 mph when we left the dock and the water dirtied up a bit. We searched for trout all morning only to find one 20.5 inch trout. Plan B was put into affect when we knew the trout would not bite. Shrimp came out on 1/4 oz jig heads on bottom, and the box began to fill. Sheep head and pup drum one after another. Plenty laughs and bent rods for everyone. Midday we decided to check one other location for trout, but not a bite to be had. We hit one more hole and found a Bay Snapper Bonanza!!! The heads were coming in every single cast. When we ran out of shrimp, we couldn't close the lid shut. Good times with these guys and they went home with plenty fillets.

Capt Marty LaCoste
985-856-4477
www.absolutefishingcharters.com
facebook.com/absolutefishingchartersLLC
https://Instagram.com/capt_marty_lacoste
Reply
Re: Bent Poles and Plenty Laughs 1-17-16
Hey Marty, can you share the details on how you converted the Ridgid saw to use the fish blade. I have been
wanting to do this!

Thanks
Reply
Re: Bent Poles and Plenty Laughs 1-17-16
YES , MARTY I WHAT TO KNOW HOW YOU MADE THE JIGSAW INTO A FILLET KNIFE
Reply
Re: Bent Poles and Plenty Laughs 1-17-16
Contact Andrew Messanger at (225) 329-3295. Tell him I referred you!! He will get you fixed up.
Reply