Please Sign In


New To Sportsman Network?

Trey's Buck Boiler

Reply
HAs any tried the BUCK BOILER for skull mounts?
Reply
   FunGi73
I bought a 120v water heater element and a galvanized bucket and made my own. Works great. I think I have $20 in to it. Get you a Meyer's hub (that's a conduit fitting) that has threads for 1" NPT. Put a few wraps of teflon tape around the threads on the water heater element and screw it in tight. I cut the male end off of an old extension cord and put some fork terminals on the end and terminated the wires on the element's 2 screws then covered all the exposed stuff with black #33 electrical tape just as a safety precaution. Fill the bucket with water, then plug in. It takes about 10 minutes for water to start boiling. You'll have to add water every so often but it pretty much takes care of itself from there.
Reply
Im a taxidermist in north louisiana, and i have one . It works great, and cuts the time in half. just add a little of dish washing soap in your water and it will do the rest.A great product!!!!
Reply
   coonass28
Do you know to get in touch with them, I called the number on the website and is says it is disconnected?
Reply