Please Sign In

New To Sportsman Network?

Has anyone fished the protection levee in Golden Meadows yet this year?

February 10, 2011 at 11:43am

I have read more then once on the site, where people were saying that mallards are not as smart as grey's. I have been duck hunting 25± yrs, and have yet to see a grey slicker than a mallard.I have a blind in a ag field on family land, that I hunt mostly, but have hunted marsh,and timber. I am just curious as to how many people feel the same as I do as to where a mallard is harder to call and decoy then a grey. I have shot my fair share of both, but would love to find a place where they have some stupid mallards lol.

January 04, 2011 at 9:13am

How would I go about tagging a deer for youth hunt?

October 07, 2010 at 8:37am

My family is going to wild wood from 3rd-10th of July. We would like to catch a few fish while we there. We have lights for the boats to fish sac-a-lait at night,but not sure what to expect.I have fished bass on Rayburn and the bend,but never this time of year.I will more then likely hire a guide to fish sac-a-lait during daylight with my daughter.If anyone has been lately or could guide me in the right direction on anything I posted would be greatly appreciative. I have been working in Fourchon for a year now,and staying in Leeville so I can put you on a few fish down here you ever come this way. Thanks Luke

June 28, 2010 at 8:07am

hats off again to Louisiana Sportsman for the hard work on everything. I Feel you guys are doing a outstanding job, from the spill to the web site on what is posted. I Stopped watching the news and and just check the blackberry are pc to see whats up. God bless the coast!! Luke

May 15, 2010 at 10:28pm

I am looking to purchase a new handheld gps for around $300 that can download maps.Does anyone have any suggestions?

April 22, 2010 at 11:46am

I have been going on the tides according to the caminada pass. I am fishing leeville east of the bayou.Do you guys think that is the best location to go by for the tide?

March 25, 2010 at 8:40am

I have fished mono my whole life. I have tried power pro ,but done with that lol . I usually use black widow by hi-seas. I have noticed it is not holding up well on the oyster beds.I like it a lot very lil memory and small diam but losing fish ,and hooks. Tried stren,berkley,and a few others,but still have not found one that I like for strength or memory. I fish 17 to 20 pd test.Do ya'll have any recommendations. The black widow did well until I started fishing a lot of oyster bottoms

March 19, 2010 at 10:20pm

Favorite artificial baits for redfish. wondering what everyone elses would be.Mine is def the baby 1 minus.what you guys think?

March 10, 2010 at 10:15am

I recently viewed a post on cleaning a cork handle on a fishing rod.I tried to pull it back up but can not find it. Can someone tell me the best way

March 10, 2010 at 8:10am
A comment titled: Tides in response to a report titled: Tide Charts

Ducks, are you serious you posted the same thing nearly in 2009 and now wanting to bash him.. SMH

November 09, 2012 at 7:45am
A comment titled: Hogs in response to a report titled: Hogs in Gueydan

jacomo, I have been hunting Toutue in Lyons Point my whole life, and killed everything but hogs. Not sure about Gueydan but nobody around us has killed are seen any yet. Hope this helps

October 23, 2012 at 2:37pm
A comment titled: Drew in response to a report titled: Could this be true ?

He's back... JS

September 21, 2012 at 8:39am
A comment titled: He say she say in response to a report titled: Cobia in a Bass Boat?

Drew, vous donne moise le fuaah !!!!!!

August 01, 2012 at 7:49am
A comment titled: Cracks in response to a report titled: Help ! Cracked Aluminum Hull

If the guy has a fabrication shop, I am sure he has a tig machine just check with him hopefully the guy who did it before did not burn up the metal. As for the brazing it is probably junk, that would be good for jewelry lol, the tensil strength just want be there.

May 30, 2012 at 1:35pm
A comment titled: Welding in response to a report titled: Help ! Cracked Aluminum Hull

I hope you can get it fixed. It will probably keep cracking on the sides of the weld, once you weld up a crack with especially mig your heat affected zone gets wider, and weakens your metal. If I where you I would try and get them to tig it. Tig will not put as much heat on your aluminum.

May 30, 2012 at 10:37am
A comment titled: Belle Pass in response to a report titled: Fourchon Report and Crew Boat Wake

Things happen real fast in Belle Pass. Last July we were fishing the West side of the pass in a 20' aluminum boat, on a slick calm afternoon with no boat in sight. My ole lady soon as we got there hooks a bull red off the back of the boat. So me and my cousin go to the back to net the fish which pops off not a few minutes we where there. I turn around to go back to the bow, and here comes I MEAN A HUGE WAVE, which is just 30 yds from us. I tell them to hold on to the CC as I try get anchor up in time. First wave can't pull it up in time and the second on is already capping. I run to the back crank the motor and ride the wave, but got 2' water already in boat. Needles to say third one flipped us over from bow to stern. I come up first then my cousin, no ole lady dive down to see and get rolled around by another wave. When I come up for air she was there. She was tangled in something under the boat she cried. Lost all of our stuff, but the Lord did not let us lose our lives. The name of the crew boat was the Megan Jolie which passed through the pass as we were in the water. I am very thankful that my now 3 month old son was fine and so were we all. Be very cautious around the Belle Pass area! Tight lines

May 19, 2012 at 9:11am
A comment titled: keif's in response to a report titled: almost a limit

go to Keif's ko

February 18, 2011 at 9:12pm
A comment titled: spawn in response to a report titled: Catch and Release

Who got the popcorn? We going to need it,rabbit where you at?

February 17, 2011 at 7:05pm
A comment titled: big nanny in response to a report titled: Finally

good job buddy, Andy thats why we work, so our kids can have the fun we did when we were there age. hahhaha its still not cool when they rub it in though. Great kill buddy get it while the getting is good

January 12, 2011 at 7:33pm
A comment titled: hybrid in response to a report titled: Hybrid Duck

i wish i would of shot it lol, beak took the words out of my mouth. nice kill

January 04, 2011 at 8:05pm
A comment titled: mottled duck in response to a report titled: Mallard v/s Grey

Guy, I def agree with you on the mottled's, especially after opening weekend.

January 04, 2011 at 10:48am
A comment titled: weight in response to a report titled: Friday Morning Trout Search

cap,we caught a few doormat's one winter with some going 5 lbs that we thought were monsters, till my buddy hooked one that was 24' long and 12' wide he weighed right under 7. I think yours is easly that

November 23, 2010 at 8:18pm
A comment titled: black jack in response to a report titled: east zone youth hunt

Scaup,or some people call them do-gris

November 16, 2010 at 9:50am
A comment titled: 9 point in response to a report titled: 9 pointer

Hey dent, that deer has a nose like yours hahah!! Nice bucks

November 15, 2010 at 7:17am
A comment titled: private in response to a report titled: ready

Miami corp and Vermillion corp, or all private leases.

November 11, 2010 at 8:12am
A comment titled: terry's in response to a report titled: Leeville Report


November 11, 2010 at 6:40am
A comment titled: chicken on a chain in response to a report titled: Bay De Chene Specks

Its a color of a soft plastic, that saltwater assasian has

October 25, 2010 at 10:14am
A comment titled: snake in response to a report titled: snakes

Wish you would of not posted that! Lol

October 22, 2010 at 8:50am
A comment titled: rut in response to a report titled: first one

Switz.. That's a fine buck. Are you hunting in Vermillion Parish? I hunt in Acadia near the line.

October 08, 2010 at 11:33am
User has no ads at this time.